Tag: SAVE ENERGY

blog

CESP LED Cold Storage Lighting Solution

Once again, CESP LED’s high performing and market leading luminaires have caused a stir within the storage and warehousing sector.

The impressive results of an installation of CESP LED Cold storage luminaires on an existing site enabled the easy decision for the owner in Dubai, to use CESP LED’s leading luminaires throughout the DUBAI-based warehouse facility.

The Cold Store lighting has been given a complete new look through the replacement of former 400W, 250W and 125W traditional HID lighting. Former exterior 400W flood lights were also replaced during the extensive lighting upgrade.

Priding themselves on using cutting-edge equipment to operate state-of-the-art frozen warehousing, CESP’s high specification luminaires offered equally innovative lighting solutions.

Food Storage Distributor-the owner, selected a range of high performing luminaires to fulfil their specific warehouse lighting requirements in the form of the LED Highbay, LED Linear light.

The host of LED warehouse lighting solutions create a fresh, bright and appealing look and a welcomed contrast from the previous undesirable orange light produced from the old luminaires.

The site, which boasts 27 freezer chambers and multi-level mezzanine picking floors, is now home to a number of CESP LED Cold storage luminaires, with benefits of the lighting upgrade already being noted.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

blog

LED Explosion Proof Lighting – Petrochemical plant

Petrochemical plant area is mainly outdoor or indoor equipment such as tower, tank, pipeline, etc., most of which are zone 1 and zone 2 explosion-proof areas, and the requirements for explosion-proof performance of lamps are extremely strict. Most of them are outdoor areas, which require good water-proof and corrosion-resistant performance. At the same time, most of them are high-altitude areas of several meters or even hundreds of meters, high temperature and high pressure, so it is very difficult to replace and maintain the lamps. Therefore, the lamps used in petrochemical occasions are not only for lighting function, but also for safety and reliability.

High standard design and safety production guarantee

Environmental safety is the most important factor in petrochemical production. CESP LED Explosion Proof lighting solutions can ensure the safety of production personnel and equipment in the production process. CESP LED Explosion Proof lighting series fully meet and exceed the standard requirements of UL844,CE,ATEX, to ensure the explosion-proof reliability of lamps and lanterns, and at the same time, accurately combine the use habits of users, to prevent the impact of light pollution and glare on the work, so as to ensure the safety of production.

Safety lighting – flood lighting in pump area under pipe rack

All kinds of production pipelines are set up above the pump area under the pipe rack. There are many pumps, equipment, instruments and pipelines on the ground for various production purposes, and the environment is complex. Most of them are zone 1 and zone 2 explosion-proof areas, with flammable and explosive gas. The equipment operates 24 hours, and lighting plays an important role in the production process. CESP LED Explosion Proof lighting adopt thread explosion-proof and explosion-proof type, ⅡC explosion-proof grade, meeting the explosion-proof requirements of hydrogen and other flammable and explosive gases. 360 ° ring illumination light distribution design, lighting without dead angle, in the complex environment of pump area under the pipe rack, lighting each area, to provide security for production.

If you are interested in CESP LED lighting solution for your facility, please send email to cespservice@gmail.com to get started.

GET A FREE QUOTE
[]
1 Step 1
GET A FREE QUOTE
Nameyour full name
Phone
Enquirymore details
0 /
Previous
Next